Thermal Modelling in Home Design
Featuring Julie Villard, Architect and Eco Design Adviser at Christchurch City Council · Oct 2026
Key points from this episode
Listen to the audio on the go
Plus our weekly energy efficient tips
What You'll Learn
→ How to predict whether your new home will stay warm in winter without becoming a sauna in summer
→ Why your window placement could be costing you 10–15% of your home’s energy efficiency
→ How thermal modelling identifies hidden heat loss, thermal bridges, and condensation risks before you build
→ How to harness free solar energy without overheating your home in spring and autumn
→ Why your home’s shape, insulation and glazing can matter more than simply choosing higher R-values
→ How thermal modelling helps you choose the right heating system and avoid paying for capacity you may not need
→ What to ask your architect or builder to give you greater confidence that your home will perform as promised
Julie Villard
Architect and Eco Design Advisor, Christchurch City Council
Julie is a registered architect with 15 years’ experience across Canada, Switzerland, and New Zealand.
Episode Transcript
Follow the conversation between House 2.0 and Julie Villard.
Host: Hello and welcome to this next episode of House 2.0. On the show today, we’ll be talking about a topic called thermal modelling. Thermal modelling helps you understand the energy efficiency of a building while it’s being designed before you build it. On the show today, we will be joined by Julie Villard, who is an architect and the Eco Design Advisor at the Christchurch City Council. Welcome!
Julie: Thank you, and thanks for having me on the show.
Host: Absolutely. To get started, to help the average homeowner at home who will be thinking: what is thermal modelling? What is thermal modelling, and why is it useful?
Julie: So an architect will design a new build on a computer, and you can use the 3D model of this computer to analyse and predict how this building is going to perform with the weather and the location for a certain period of time. Basically, you can figure out how the building is going to perform before you’re actually building it, right? It’s very useful.
Host: Right, it’s kind of the idea of, because you’re designing the whole building in 3D, this is simulating how will this building be when it’s real, and you might use it through the process, changing designs based on how it’s performing until you’re happy with it, and then that is what gets built. Would that be right?
Julie: That’s correct.
Host: So at the moment, what is the current Building Code standard for energy efficiency, and how is it calculated?
Julie: The Building Code is divided in sections. If you look at the Building Code on the MBIE website, you’ve got B is for structure, C is for fire, H is for energy efficiency, right? So we’re looking at this clause of the Code. And under H1, there is some minimum requirement for zoning. So we’ve got five zones in New Zealand.
Host: What’s a zone, just so people know?
Julie: In Christchurch, we are in Zone #5, so the requirement for insulation might be a bit higher than the one for Auckland, for example. There are five climate zones, and they are just like regional zones. And then in Christchurch, we are in climate zone five, so it’s a bit more restrictive than if you were building in Auckland. On H1, it also depends on the type of building you’re using. If you’re building a residential home, the requirement might be a bit different from a commercial building.
Host: How is energy efficiency calculated?
Julie: Currently, at the moment, we have three methods of compliance. The first one is the schedule method, the second one is the calculation method, and the third one is the modelling method. They are the three options designers have to demonstrate how it complies with the Building Code. At the moment, the schedule method is on the chopping board. In November 2026, it’ll be gone, because it’s not accurate.
Host: So it’s just not accurate enough, and one of the other two is better.
Julie: Yeah, the two others… there is a simplistic option, which is the calculation method, and there is a more accurate option, which is the modelling method.
Host: Right. So the thermal modelling that we’re talking about today is the third option.
Julie: Absolutely.
Host: And that’s the most robust option. It gives you probably the better answer to date.
Julie: Yes, to date.
Host: The caveat “to date”.
Julie: To date.
Host: Okay. What has been good or bad about the other two, other than thermal modelling, so far?
Keep reading...
Julie: They are average. They’re not really specific to the design, right? The modelling method is the one where we’re going to actually take the real model and compare it to the same model with the requirements from the building code. The two others, they’re just assumptions. For example, we’re going to pretend there is 30% of windows for the whole building, but you may have less or you may have more. But it’s not really what you actually have, right?
Host: So it’s not the actual 3D model of the building that is then… Is that more like working off a spreadsheet, that type of thing?
Julie: Kind of a lot of numbers, yes.
Host: Yeah, and it’s an equation.
Julie: An equation.
Host: And it’s a bit of a blunt tool.
Julie: Yes. My guess would be like, they were a very simple tool designed for designers to actually achieve a minimum requirement, whereas the modelling method is used widely overseas by professionals, by specialists. Then here in New Zealand, we’re a little bit in between and in a transition period where the modelling method can be used by designers, architectural designers, draftspersons, but more and more specialists and thermal engineers are going to be the people who are going to do it, because it becomes just really complex.
Host: So what can modelling tell us before construction starts?
Julie: It can tell us a lot if you put the right information into it.
Host: So there is a process.
Julie: Yeah. I do a little bit of modelling myself on buildings, and I remember I did a design and then I found that I had so many heat losses through the building. I was like, “What’s going on?” And I found like two of my walls weren’t really connected, so I had an air gap and the model thought that was like an opening, like a window open, and I had a lot of heat losses there. So you really have to be accurate with your 3D model to be where you want to be.
Host: I suppose it’s at the level of building science, isn’t it? The inputs will completely affect the outputs. So if, as you say, if you have a gap in the wall, it will say, “Well, this is really not performing,” because which high-performing house has a gap in the wall? None of them.
Julie: Exactly, yeah.
Host: What will it tell us before construction starts?
Julie: It can tell us a lot. Mainly people use the modelling method to tell you how much heating you will need or how much cooling you will need for your building to stay at a constant temperature of, let’s say, 20° all year round. This is the primary focus on thermal modelling, but you can use it right at the beginning before starting construction to tailor your design to exactly what type of performance you’re looking for.
Host: Okay.
Julie: And it could be that you want the building to have a very average temperature constant all year, or you may be: “No, I want a little bit more in winter and a little bit less in summer.” You can also predict the behaviour of airflow and figure out if you prefer to do natural ventilation or… yeah, you can predict a lot of figures in it.
Host: So what’s a good example for people to think about? Say they were interested in having an even temperature in all the rooms throughout the whole house all year. What is that modelling telling you so that you know that is happening?
Julie: I’ve got a really good example where a designer wanted to design a new house and then didn’t know what type of insulation to use – either fibre insulation or rigid or semi-rigid insulation – and they behave very differently in winter and summer. So which one will be the most appropriate for this design? Thermal modelling can tell us that.
Another very interesting one is leaky buildings, right? Having condensation in the wall is usually not ideal and you end up with a lot of problems, and you can calculate where is the dew point in the wall where condensation will happen. If you change the thickness of the insulation or the type of insulation or the different layers you’re using in the wall, you might actually achieve a wall that stays warm and dry all year round. So you can go down the rabbit hole of all the little details of how my building performs.
Host: It sounds like you absolutely should be doing it on every project, because imagine… We covered hitting a dew point in an earlier episode: it’s where the heat from the inside to the cool of the outside, you hit a certain point where water comes out of the atmosphere. That’s the dew point. The idea that you could calculate where that’s going to happen and not put insulation at that point – like it could happen in an internal batten for example – so that the insulation can’t get wet.
Julie: Absolutely.
Host:That’s the type of thing where I just go: it’s a no-brainer. This is absolutely how things should be designed to have that. Could you talk a little bit about the idea of energy efficiency or how we equate kilowatt-hours per square metre, that type of thing? If we want 20° all year long, and one of the limitations, say, is how much energy we want to use in winter to heat, how thermal modelling can help us get to that point where the trade-off of how much it is going to cost to build a much more insulated box versus how much energy you’d have to buy and use to heat it, and that type of design trade-off.
Julie: The way we design buildings in New Zealand is we’re relying on R-value, right? The insulation performance of a product—
Host: Just remind people what R stands for.
Julie: R-value is for the resistance of heat loss, right? How much energy goes through building material for a certain period of time.
Host: So is a large R-value good, or is a small R-value good?
Julie: A large R-value is better than a small one. We’re relying on these values to define the performance of a building. It’s really limiting in that sense, because we just look at one figure. Overseas, or if you use the modelling methods, you might use a different value, which is kilowatt-hours per square metre—so how much energy in general you’re actually losing through the building fabric. It’s way more accurate, and you can relate that to the heat pump you need to heat your place, and then you might actually find out how much energy right there you need, and you can size your heating system or cooling system with it.
Host: So that’s quite a bit.
Julie: People may assume that if you put more insulation, your building is going to be more performant, right? And that’s not necessarily the case. If you use the modelling method, designers might use the modelling method to actually confirm or affirm this sentence, and you might find out that reducing a little bit the glazing area of your building might do a way better job to make your temperature constant versus actually putting more insulation everywhere. So at the end, you might actually save some money by not adding too much insulation where it’s not necessarily needed and by reducing the amount of openings you may have in the building or working with shapes. Form factor is also very important. If you’re compact, you’re more efficient. If you’ve got a million corners in your designs, that might be a different story.
Host: Is that the surface-to-volume ratio?
Julie: Yes.
Host: For homeowners, what is really interesting about this piece is that you may have assumptions about a highly energy-efficient home just having the thickest walls, and that you have triple glazing and everything’s fine, but there’s so many other aspects, not only in the design—so you have to have a great designer—but also in the modelling. Modelling the shape of the house, modelling the size and dimensions of the windows. As you say, if you dramatically reduce the actual area of glass, you might totally change the performance of the house. If you’s not thermally modelling, you may not really know what’s happening, and then you build it and discover it’s overheating.
Julie: Yeah, and then sizing the eaves or sizing your underfloor heating, dealing with thermal bridges, it’s a big one, too. The very interesting thing as well is when you’ve got two or three storeys high, thermodynamics tell us that heat rises, so the top floor is always going to be warmer than downstairs. How do you deal with that? You might have overheating naturally by air movement, so it’s not necessarily overheating by having extra sun that you don’t necessarily want, it might actually come from inside. There is a lot you can play with.
Host: I guess if you don’t have that thermal modelling during the design process, you don’t always know what your design decisions are doing. You don’t know what the outcome of changing that window is as a performance versus an experience.
Julie: Yeah, you’re right. If you don’t use thermal modelling, you’re relying on the experience of the designer to achieve what you think is good, and you may have some surprises sometimes.
Host: Are we to say that the homeowner who’s watching this show, when they’re engaging either a design-build company or an architect or something, one of their questions to them is: “How are you modelling the performance of this house?” Would that be a relevant thing?
Julie: Absolutely. It’d be like, “How confident are you with designing building without using the modelling method?” That would be interesting, absolutely.
Host: Something that you referred to just a moment ago was the sun. I think people sometimes forget how important this enormous energy source in the sky is about the design of a house, the orientation towards that big orb, and then how it changes in summer and winter. Can you talk a bit about how thermal modelling helps the design process of how this house operates with the sun?
Julie: The sun is amazing. It’s a free source of energy when the sun is actually shining. When it’s not shining, well, you don’t really have that energy, so you have to compensate for the heat you need. The sun doesn’t have the same angle in winter and summer, so you can design a building for winter and summer, and the size of the eaves and the roof angle might help you to control the amount of energy you can get in. On average, from school like 20 years ago, I remember that one square metre of glazing facing north is 1 kilowatt of energy per hour of sunshine, right?
Host: And what does that equate to? Say somebody has a little heater in their house: those are usually 1 kilowatt or 2 kilowatts as well. So each square of glass is the equivalent to one of those heaters that you would have on the floor, like a column heater.
Julie: Yeah, so if you’ve got 20 square metres of glass, you’ve got 20 heaters all over the floor, all turned up to 1 kilowatt per hour of sunshine.
Host: Wow.
Julie: I call them fish tanks, but if you’ve got way too much glazing facing north, overheating is guaranteed.
Host: Right. And earlier you had said the word eaves. Could you just remind people what eaves are?
Julie: Eaves are like the hat of a house with eyebrows, and basically it’s an extension of the roof and it’s protecting the windows from direct sunlight depending on the sun angle.
Host: So for a homeowner, if these were their windows facing north, for example, the eave—say the sun’s up there—the eave comes down and then you don’t have sun strike going into the room doing that 1 kilowatt per metre.
Julie: Exactly. You reduce the heat gain, and in summer the sun’s higher so you don’t have it. But in winter it’s lower, so without moving the eave, you actually get some sun in winter when you actually want the heat.
Host: So there’s a lot of design in just eaves.
Julie: The trick is, in general we design buildings for winter or summer, but the off-season could be a trigger because the eave is designed for winter and summer and works really well, but in between it might not perform as you want. We’ve got designs where you get overheating in spring and autumn, but not in summer.
Host: Interesting. So are you seeing people use thermal modelling to solve for that?
Julie: Absolutely.
Host: So a homeowner should be saying, “Okay, great. I’ve thought about winter -well, my architect or designer has thought about winter, thought about summer – but what about those shoulder seasons? What about all those months in between?” It’s a lot of the year – it’s about half of the year where you might suddenly have all these thermal problems. So this thermal modelling, how does it help compare different design or specification choices, which could be materials, windows, things like that?
Julie: With thermal modelling, we can decide to change one parameter at a time and see what the effects are on the overall performance of the building. You might be like, “I want to feel 2° warmer in the shoulder season because I just love being warm,” and then you might decide to change one parameter of your building to achieve that specific target. Or, for example, you have a lovely collection of books and antiques, and they really have to have a very constant temperature all year round, so you’re going to make sure that room is designed for that specific purpose.
Host: So it can get that specific. It could create one room at a very specific temperature, humidity, whatever it is, for the whole year.
Julie: You set the parameters.
Host: Okay. What you were saying just before about where you change one parameter: what’s an example of something a designer could change and then rerun the model and see how the performance changes?
Julie: The classic one would be the type of insulation or the thickness of insulation. Do I need 90 ml? Do I need 140 ml? Do I need external insulation? What are the benefits from it? Another very interesting one is the steel used in a building. It can create a lot of problems with condensation if it’s located outside the thermal envelope or if it’s going through the thermal envelope. Here we can find technical solutions to a very physical problem we may have with that part of the building, so you can model wrapping the beam with rigid insulation to see what will be the outcome, and you’ll be like, “Cool, no condensation, compliance with E3, and no moisture – tick.”
Host: For a homeowner, they might be thinking, “Oh look, I’ll engage with an architect, and then it’s all about just where do I want to sleep, and what view do I want out of the lounge,” and things like that. But there’s actually a whole hidden world of all these design decisions that affect how the whole thing performs, including things like the entire shape and things like, “Well, if we need to use steel because you want the roof so high, you want this huge internal space, we need to use steel.” And then all of a sudden, cold outdoor minus-2 steel is coming into the room, and it’s essentially creating a thermal bridge, which we’ve talked about in earlier episodes, and then condensating. There’s so much for a homeowner to think about when engaging this professional of like, “Are they thinking about all of this stuff, or do I just end up with an arrangement of boxes which I quite like, and then hopefully it doesn’t cost too much to build?”
Julie: You might decide as well to rotate the building, you know? Rotate it by 10° and see what the impacts of that are, and see if you get more sun in the morning or more sun in the afternoon, or what you’re trying to achieve. You can do a lot, that’s for sure.
Host: Let’s talk more about this idea of thermal modelling for energy efficiency and then the use of energy when the house is lived in. When you’re modelling, how accurate is it about predicting energy efficiency, thus energy use for the homeowner going forward?
Julie: I mentioned earlier, it really depends on what data you put in the model. The more complex and the more information you provide in the model, the more accurate it will be. I think that’s a very important point where, if you don’t specify, for example, the centres of the studs, you want to have that accurate to make sure the percentage of timber in the wall is what is going to happen at the end. If you’ve got that wrong at the beginning, you might not have accurate modelling. So it’s really important to be accurate with the data and the information you design right at the start.
Host: Do you feel like some people might try and sidestep the amount of information you’d need to put into the model because it feels like a lot of work if they don’t really value what the model is telling them?
Julie: It’s a working process. For example, when I designed my own house in Lyttelton, I used a professional to size my underfloor heating. I was a bit pedantic, and I said to him, “Send me the report, send me the thermal modelling, and I will have a look at it, and I want to make sure it works with the very general knowledge I’ve got from school.”
He provided me all this information, and I found that the heat need was a bit higher than what I would expect. So I looked at the report, and I realised he didn’t consider that I had a ventilation system with a heat recovery unit. At the end, I just gave him that feedback, and he came back to me and was like, “Hey, here’s the new data.” I was really pleased. The house needed a 4.3 kW heat pump to heat the whole house to 20°. The thermal engineer was like, “Well, I’m going to specify 5 kW just in case.” That was a very interesting exercise, because I don’t think a lot of people go down to that requirement for sizing a heating system.
Host: Do you see that coming? Do you see that as the industry changes over the years and decades, that that will become quite normal?
Julie: Yes, absolutely.
Host: What are the common surprises modelling reveals?
Julie: Today, a very important topic is overheating. People want to design a house and make sure heating is probably going to be covered really nicely, but overheating is something that occurs more and more often, and people want to make sure their house is not going to be a hotbox. That’s very important, and you can model that. If you find that your building is going to overheat, you’ve got options. You can decide to change the design, or you might decide to just change the size of the openings, or maybe having less fixed glass, having more windows you can open to flush, or adding a skylight to flush the building, or adding some interesting features like landscaping and having a pergola. What’s really important for homeowners is if you have a problem and you identify a problem with the modelling, you have options on how to address it. Some might be very cost-effective, some might be not so cost-effective, or you might decide not to care and just have a heat pump to cool down the building.
Host: And the choice is to use energy instead of using shape or sun cover or trees or something. So what is the benefit to the homeowner watching this show in using thermal modelling through the design process of their new house?
Julie: I think the most important point is that it gives more confidence on the building that’s going to be built, and to perform as intended. I think having that certainty is crucial. It’s like when you buy a car and they tell you it goes from 0 to 100 in 6 seconds, you might want to check that when you get it. Same for a house. You might be like, “Cool, performance!” Yeah, performance is key, and that’s one way to actually be more confident that this is going to be achieved.
Host: I think that’s a huge point. I do wonder how many people really think about the performance of their house from an energy perspective, and really going through the design process, one of the brief requirements is a performance number potentially from the customer, and for them to be in the headspace that the performance of the house is literally part of the deliverable, not just “Yes, I have a house and it deals with me not being rained on.” That’s nice, but there’s actually performance numbers. What should homeowners be thinking about when engaging designers in terms of what their performance goals could be? How should they think about performance goals?
Julie: To me, when the discussion starts about performance, it brings up another interesting topic, which is finance and budget. This is a conversation that any homeowner should have with the designer, to talk about the budget of the build. Are we going to build something cheap, but the bills over the years are going to increase? Or are we going to build better and have very small or low power bills in the expectation of the lifetime of the building? Performance is important, but it’s also associated with the budget. The more performant you are, the more expensive you will be at the design and the build, but later on you’ll be free from all these expensive power bills. The price of power is just going to go up and up and up, so it’s very important to address that with the designer.
Host: That’s an interesting point, because people are now thinking a lot more about that with cars. They go, “Okay, what’s the buy price? What do I buy it for? And then what does it cost me to run it for the next decade?” Comparing petrol cars to diesels to electric cars and looking at the entire cost, not just “I now have a house”. It’s like “I have a house and I have 10 years of operating costs,” bunching it together as one whole number. I think that’s really interesting.
Julie: That’s one. The other one is comfort and well-being. We don’t necessarily associate it with performance, but if you have a performant building, you’re less likely to be sick at home because your indoor environment is controlled, whereas if you live in a building that is not that performant, you might be a bit more sick.
Host: We’ve been seeing that with some of these newer buildings that are built to perform slightly better in one angle – like they get more and more insulated, they get double glazing. If you were to do a blower door test, which we’ve talked about before, it might get something like a five, and you go, “Okay, so it’s becoming a lot more airtight, but it has no ventilation system.” So all this air is just being trapped, and then the moisture is being trapped, and the CO2, and as you say, the health of the occupants, these humans walking around in this box, they’re not having a good time. So does thermal modelling think about that part of it, too?
Julie: Absolutely. What I like about thermal modelling is it thinks of the house as a system. It doesn’t think in silos. You don’t work in silos where I’m just going to look at insulation, I’m just going to look at ventilation, I’m just going to look at the thermal envelope or just the location of my windows. Thermal modelling allows you to actually combine all this information together to give you an idea of how this system you actually created is going to work. It’s very, very efficient in that sense, because technically, if you have a house that is airtight, you might want to use a heating device that heats the air so it works together, but you might choose a different type of heating system that might not work that well if it works differently.
It’s very similar to cars in that sense, because when you design a car, you have to consider all the factors. The factors are, for example, what you put in the car: the powerful engine, the brakes, the windscreen for protection from the wind, roof, or having lights for driving at night. It’s designed for its environment as well, to protect you, and it’s designed for the driver as well. A house is a bit the same: you’ve got the envelope, the building, but you also have to respond to the weather conditions, making sure you’re going to stay warm and dry inside. Where it’s a bit more tricky is the user: is the user going to be able to adapt to this new way of living or not? That’s where a lot of automation can help to work with it.
Host: And are you able to thermally model that type of thing as well? You’re able to model different heating sources, mechanical ventilation, automation of things opening and closing based on where the sun is?
Julie: Sbsolutely. We don’t have to reinvent the wheel, like overseas they’re doing it big time. I used to work in Switzerland, and in Switzerland they’re like 5 years ahead of France, but 5 years behind Germany, right? When I was working there as an architect, the Code said, “We don’t trust humans to do natural ventilation, so we’re going to make it mandatory that the windows need to open for 5 minutes every day, that’s it, end of the story,” by a machine. So that was a thing, it’s automatic, you have to do it, this is it, and it solves a lot of problems. I’m like, cool, we might go down that road.
Host: How are you seeing thermal modelling being used across projects that are being consented through the council?
Julie: Very, very interesting. More and more residential homes are using the modelling method, and it’s not necessarily because they have to. If you design a building that has more than 40% of windows for example, that’s the only method you can use, right? But there are a lot of designs that don’t reach that threshold, but still use the modelling method just because they want to do better. They need a bit of reassurance that what they’re designing is going to perform as expected. So that’s really encouraging. They generally want to have a more efficient building.
Then there is a very, very small percentage of projects where designers want to find: what is the bare minimum I can go with using this method of compliance, just to save money on the building cost pretty much, so reducing the insulation to the bare minimum, or the windows is often the one.
Host: I see. And that’s to do the bare minimum to the Building Code, which on this show we already know the Building Code’s not actually high enough for general human comfort. So that’s the bare minimum you can do; if you do lower than that, it’s illegal.
Julie: It’s bad.
Host: We’re hoping that that will sort of fade away as the Building Code becomes more and more robust in this area of comfort.
Julie: I really like, in America, in their Building Code they’ve got minimum, better, best, so designers can choose what level, or the client can decide what level they want to use.
Host: So we could bring that in here.
Julie: Yeah, that could be cool.
Host: In terms of talking about the Building Code, in your opinion, what would you like to see changed in the Building Code?
Julie: A lot of stuff. I’ve got my own little list. But in the near future, I think the modelling method is going to become the main priority for compliance, and possibly the only one at one point. I would love to have a climate change and carbon clause in the Code just to deal with that. Airtightness needs to be addressed, probably in G4. Thermal bridging could also be addressed as well. So yeah, I can go on if you want to.
Host: This all sounds good. This all sounds like it’s very tied to the performance of the building, but also the comfort of the occupant, which it seems that from what I’ve learned is that the Building Code doesn’t lean that heavily into the actual comfort of the person who lives there. It’s just like the technical “we’ll keep you out of the rain and it won’t fall over” sort of thing. I guess you’re saying you’re advocating for: let’s go towards a thing where the house actually is much nicer for a human being to be in, an organism.
Julie: Yeah. When I moved to New Zealand, I used to live in this beautiful old villa built in 1905, but the first winter I went to the doctor four times because I was sick, right? And I didn’t realise, but the house was making me sick: too cold, too draughty, too everything. I moved into the new build we’ve done with my partner in Lyttelton, and I’m barely sick, never. The house is warm and dry; it just speaks for itself.
Host: It can have an enormous effect on your life.
Julie: Yeah, and mental health as well.
Host: You see a lot of projects. Do architects and builders need to learn a lot, or are they on the journey?
Julie: Everyone is on the journey, and everyone needs to keep learning. Life doesn’t stop, we always have to improve, things change. Everyone has to learn and progress.
Host: Are you seeing any resistance to using thermal modelling, just because sometimes it’s something new? “Oh, it’s just another thing.”
Julie: Yeah, and it could be pricey as well at some point. But nowadays it’s not so much of a niche, so you can have professionals that can help you really quickly for an affordable price if you don’t want to do it yourself as a designer. And then it’s just the reassurance of making sure what you’re designing is going to perform as intended that is really crucial.
Host: Going forward, do you think this is a tool that should be on the belt of designers – that all designers, architects, architectural designers should be able to do thermal modelling as part of the design process, or do you think it will split into specialists and architects?
Julie: Well, overseas tells me the world becomes so complex like we need specialists for it: thermal engineers, climate change engineers. Even in Australia they are using specialists for energy efficiency, and I think they can provide you very quick feedback when you do the design process on what to do to improve your building in general.
It could be very complex. As a designer, there are so many things to think about. I like to think of architects or architectural designers as generalist engineers: they know a little bit of everything, but they’re not really specific in one area. They know a bit of electricity, a little bit of plumbing, a little bit of engineering, concrete foundation, bracing, but they’re not really specialists in that area. If you need a specialist in that area, you go and see a professional for that. So I think there is a general knowledge that we have, and then we can build on working with experts, and I think energy efficiency is going to lead that way. But that’s just my personal opinion.
Host: Of course. So it’s a growing industry. Young people could be thinking, “Oh, this could be something I’d like to get into,” and this as an industry will be expanding into the future and creating all these jobs.
Julie: Yep, get in there now.
Host: In your time at the council, have you seen positive change over time in this area?
Julie: Absolutely. I like data myself, so I asked the council to give me a bit of data on the three methods of compliance, and basically the schedule method that will be made redundant in November was used by 5% of designers in 2024.
Host: 5% seems low.
Julie: Yeah, so no one is using this method, so the government is removing this method because it’s a bit irrelevant.
Host: It sounds efficient to get it out of the way.
Julie: Yeah. It shows that over a certain period of time, things have evolved big time. Another one is recessed windows. 30% of new builds have got recessed windows.
Host: Can you let people understand what that means to have them recessed or not?
Julie: The window is in line with where the insulation is, so the insulation is not where the cladding is, it’s in the middle of the wall. So the window is pushed back on the wall rather than on the outside or on the surface. We can do a podcast about it, I’m passionate about it too. But this is a new way of doing things. 10 years ago, no one did it; now 30% of new builds do it, and it will become standard very, very soon.
Host: So if you put the windows on the very outside in alignment with, say, the cladding or even further, what is that doing to the performance of the house?
Julie: Well, you’re creating a thermal bridge, you’re creating heat losses, you’re allowing the hot air inside to find a gap to go quicker outside, and you’re losing energy, so you’re less performant. It’s part of the performance of the building, and thermal modelling can help you to tackle that little detail.
Host: Right, so if a designer puts in windows at the cladding level and then somebody does a thermal model of it, they’ll just be like, “You need to move all these windows because look, this house is going to cost X more dollars per month to heat.”
Julie: You will quickly identify that the surface temperature is way cooler around the windows. The windows might be very performant, but just the connection between the windows and the wall is not, and then you might lose 10–15% of the efficiency of the whole thing.
Host: Which is huge – that’s a big number.
Julie: Yeah.
Host: As a closing question, how would you like to see the industry change?
Julie: I think working with professionals in thermal efficiency is crucial. We need to go there: we need to have thermal engineers, we need to have specialist experts in this area because it gets so complex with the new materials, the new technology, what is available to us. I think this is a crucial area where I can see a lot of potential, and I’m excited about it. Also looking at what other countries are doing or other materials, I think it’s always important to leave the door open to new things.
Host: Great. Well, thank you for being on the show today. This has been extremely interesting, and I hope everyone at home has learned everything they can about jumping into the world of thermal modelling and how it’s going to help your next house be a really good house for you. So, thank you, Julie.
Julie: Well, thanks to you!